ra600-sla-3dprinter-01
  • ra600-sla-3dprinter-01
  • uniontechra600part3-600×600
  • uniontechra600part2-600×600
  • uniontechra600part1-1672726210-600×600
  • ra600-sla-3dprinter-03
  • ra600-sla-3dprinter-02

UnionTech RA600

UnionTech RA600

SLA 3D Štampač za kalupe za gume

RA600 je razvijen za potrebe izrade kalupa za gume, savršeno reprodukuje šare, povećava produktivnost i smanjuje troškove proizvodnje. Digitalna fabrikacija kalupa za gume bazirana na 3D štampi skraćuje vreme proizvodnje “master” kalupa za gume, optimizuje proces i smanjuje potrebu za radnom snagom. 3D štampa omogućava izradu “Master” kalupa sa ekstremno komplikovanim i kompleksnim šarama preciznosti od ± 0.1 mm.

Категорије: ,

Опис

RA600 Technical Data

Build Volume 600 × 600 × 400 mm 23.6 × 23.6 × 15.7 in
Accuracy Dimension <100 mm: ±0.1 mm

Dimension ≥100 mm: ±0.1% x Dimension
Layer Thickness 0.05-0.25 mm
Laser 355 nm, solid-state frequency tripled

Nd: YVO₄
Beam Focus Dynamic & Variable
Beam Size 0.12-0.8 mm
Material Compatible with commercial available resins for 355 nm stereolithography
Scanning Speed 8-15 m/s
Controlling Software UnionTech™ RSCON
Data Preparation Software Polydevs
Operation System Windows 10
Input File Format .usp
Network Type and Protocol WiFi, Ethernet

Using MQTT, HTTP, TCP
Electrical Requirements 200-240 VAC, 50/60 Hz
Rated Power 2.6 kVA
Systems Control Closed-loop
Temperature Range 72–79 °F (22–26 °C)
Maximum Change Rate 1 °C/hour
Relative Humidity < 40%
Machine Size (W x D x H) 1375 × 1295 × 1930 mm
Machine Weight 850 kg
Initial Resin Weight 105 kg
Resin Vat Manually / Fixed
Processing and Finishing Post-Curing Unit (optional)
Warranty 12 Months

Повезани производи