Status porudžbine možete da proverite putem emaila ili chata.

Podrška i reklamacije: kliknite ovde
1 2
Bambu Lab  |  SKU: 3729  |  Barkod: PF003-C+SA007-EU

Bambu Lab H2C AMS Combo (non-laser version)

316.830,00 RSD
Porez uključen Dostava obračunata pri naplati.
Fotografije su ilustrativne prirode. Prikazani proizvod može se razlikovati od stvarnog proizvoda, a svi dodatni elementi služe isključivo za demonstraciju funkcionalnosti i nisu uključeni u cenu.

Karakteristike proizvoda

Bambu Lab H2C AMS Combo (non-laser version) je napredni 3D štampački sistem koji kombinuje vrhunsku tehnologiju pC štampača sa fleksibilnošću AMS modula za automatsku višematerijalnu i višebojnu štampu. Ova verzija ne uključuje laserski modul, fokusirajući se isključivo na preciznu, brzu i pouzdanu FDM štampu.

H2C koristi inovativni Vortek sistem za automatsku zamenu hotendova, zatvorenu komoru i AI nadzor štampe, što omogućava stabilnu proizvodnju tehničkih i kreativnih modela. Uz AMS sistem, korisnici mogu štampati u više boja ili kombinovati različite materijale bez ručne zamene filamenta, čineći ovaj model idealnim za profesionalne projekte, dizajn i prototipove.

Ključne karakteristike:

Radna zapremina:

  • Štampanje sa jednom mlaznicom: 325 × 320 × 325 mm
  • Štampanje sa dve mlaznice: 300 × 320 × 325 mm
  • Ukupna zapremina za dve mlaznice: 330 × 320 × 325 mm

Mlaznica: do 350 °C – podrška za PLA, PETG, TPU, ABS, ASA, PC, PA i druge inženjerske materijaleGrejana komora: zatvoreni sistem, temperatura do 65 °C za stabilnu štampuAMS modul: automatska promena filamenta, do 4 boje/materijala (do 24 uz proširenje)AI funkcije: inspekcija prvog sloja, detekcija grešaka, automatsko pauziranjePovezivanje: Wi-Fi, LAN, USBSoftver: Bambu Studio, kompatibilnost sa standardnim slicerimaBez laserskog modula: fokus na FDM štampu bez dodatnih funkcija graviranja

Za koga je namenjen?

Bambu Lab H2C AMS Combo je savršen za korisnike koji žele vrhunsku višematerijalnu i višebojnu štampu uz maksimalnu automatizaciju i pouzdanost. Namenjen je profesionalcima, dizajnerima, inženjerima i kreativcima koji traže alat za kompleksne projekte bez kompromisa. Ova verzija ne uključuje laserski modul, ali je kompatibilna sa budućim Laser Upgrade Kit-om, koji omogućava nadogradnju na punu pC Laser verziju.

Bambu Lab H2C - Technical Specifications
Printing Technology

Fused Deposition Modeling

Body
Build Volume (W*D*H) Single Nozzle Printing: 325*320*320 mm³ (Left)
Single Nozzle Printing: 305*320*325 mm³ (Right)
Dual Nozzle Printing: 300*320*325 mm³
Total Volume for Two Nozzles: 330*320*325 mm³
Chassis Aluminum and Steel
Outer Frame Plastic and Glass
Physical Dimensions
Physical Dimensions 492*514*626 mm³
Net Weight 32.5 kg
Toolhead
Extruder Gear Hardened Steel
Nozzle Hardened Steel
Max Nozzle Temperature 350 °C
Supported Nozzle Diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Cutter Built-in
Filament Diameter 1.75 mm
Extruder Motor Bambu Lab High-precision Permanent Magnet Synchronous Motor
Heatbed
Build Plate Material Flexible Steel Plate
Included Build Plate Type Textured PEI Plate
Supported Build Plate Type Textured PEI plate, Engineering Plate
Max Heatbed Temperature 120 °C
Speed
Max Speed of Toolhead 1000 mm/s
Max Acceleration of Toolhead 20,000 mm/s²
Max Flow for Hotend 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
Chamber Temperature Control
Active Chamber Heating Supported
Max Temperature 65 °C
Air Purification
Pre-filter Grade G3
HEPA Filter Grade H12
Activated Carbon Filter Type Granulated Coconut Shell
VOC Filtration Superior
Particulate Matter Filtration Supported
Cooling
Part Cooling Fan Closed Loop Control
Cooling Fan for Hotend Closed Loop Control
Main Control Board Fan Closed Loop Control
Chamber Exhaust Fan Closed Loop Control
Chamber Heat Circulation Fan Closed Loop Control
Auxiliary Part Cooling Fan Closed Loop Control
Toolhead Enhanced Cooling Fan Closed Loop Control
Supported Filament Type

PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS;Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA, PPS

Sensor
Live View Camera Built-in; 1920*1080
Nozzle Camera Built-in; 1920*1080
BirdsEye Camera Built-in; 3264*2448 (Equipped with Laser Edition)
Toolhead Camera Built-in; 1600*1200
Door Sensor Supported
Filament Run Out Sensor Supported
Filament Tangle Sensor Supported
Filament Odometry Supported with AMS
Power Loss Recovery Supported
Electrical Requirements
Voltage 100-120 VAC / 200-240 VAC, 50/60 Hz
Max Power* 1800 W@220 V/1250 W@110 V
Typical Power 200 W@220 V/200 W@110 V (Single Nozzle Printing PLA)
Working Temperature

10 °C-30 °C

Electronics
Touchscreen 5-inch 720*1280 Touchscreen
Storage Built-in 8 GB EMMC and USB Port
Control Interface Touchscreen, mobile App, PC App
Motion Controller Dual-core Cortex-M4 and Single-core Cortex-M7
Application Processor Quad-core ARM with NPU
Software
Slicer Bambu StudioSupports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
Supported Operating System MacOS, Windows, Linux
Network Control
Ethernet Not Available
Wireless Network Wi-Fi
Network Kill Switch Not Available
Removable Network Module Not Available
802.1X Network Access Control Not Available
Wi-Fi
Operating Frequency 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE)2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
Wi-Fi Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
Wi-Fi Protocol IEEE 802.11 a/b/g/n
Nazad na vrh