1
Of
2
Loading...
Azurefilm PVA filament
Regular price
5.703,65 RSD
Unit price
Unavailable
Na fotografijama proizvoda prikazan je 3D štampač i drugi uređaji sa dodatnim materijalima radi ilustracije upotrebe. Filamenti, rezini i prahovi nisu uključeni u cenu uređaja i kupuju se odvojeno. Pogledajte našu ponudu AzureFilm filamenata, Formlabs rezina i prahova i Bambu Lab delova kako biste kompletirali svoj sistem za 3D štampu.
PVA filaments
PVA (Polyvinyl Alcohol) is a soluble support filament that plays an important role in 3D printing. When printing objects with larger, inclined angles, support filaments provide support and prevent bad overhangs . PVA is a popular support filament that dissolves completely in water within 24 hours , leaving the printed object intact and undamaged. This material has similar printing properties to PLA, making them a good match. PVA is most often used with dual-extruder 3D printers , where one head prints the base material (eg PLA, PETG or ABS) while the other prints the PVA material to provide support at all the main corners where the base material would otherwise be. After printing, place the product in warm water and within 12-24 hours, the PVA material will dissolve, leaving your base material and a wonderful product.PVA filament
Let your designs soak in with our PVA filament leaving you with outstanding results. To learn more about support filaments, read our blog . You can access the Technical Sheet here .Recommendations for the press:
- Print at 190-210°C for best results.
- The recommended temperature of the printing table is 50–160°C.
- Use a glass bed, PEI board, Kapton or blue work platform tape with 3Dlac spray.
