Order status: email or chat.

Support and complaints: click here
1 7
The filament is supplied as a refill without a spool and requires a master spool (reusable) for assembly. You can use Bambu Lab or Azure. If you don't have it, you need to buy it with the first refill.
AzureFilm  |  SKU: 3305  |  Barcode: FWR171-7001

Azurefilm Refill LumberLay filament

3.798,00 RSD
Tax included Shipping calculated at checkout.
Filament diameter
Filament net weight
Color

Iskoristite količinske popuste i uštedite pri većoj kupovini:

  • 5+ kom — 5% popusta
  • 10+ kom — 8% popusta
  • 30+ kom — 10% popusta
  • 50+ kom — 13% popusta
  • 100+ kom — 14% popusta
Fotografije su ilustrativne prirode. Prikazani proizvod može se razlikovati od stvarnog proizvoda, a svi dodatni elementi služe isključivo za demonstraciju funkcionalnosti i nisu uključeni u cenu.

Karakteristike proizvoda

Upoznajte Azurefilm Refill LumberLay – jedinstveni materijal koji izgleda i oseća se kao pravo drvo. Ovaj filament kombinuje prirodan izgled sa održivim praksama 3D štampe.

LumberLay filamenti sadrže 40% recikliranog drveta i 60% PLA, što omogućava da vaši odštampani modeli imaju izgled i teksturu prirodnog drveta, uz fizička svojstva slična drvetu.

Dizajnirani su za upotrebu sa Master Spool sistemom kako bi se smanjio otpad i podržala održivost. Takođe su kompatibilni sa Bambu Lab Reusable Spool.

Važne napomene

  • Filament mora biti osušen pre upotrebe (8 sati na 55°C).
  • Nije kompatibilan sa diznom od 0,2 mm.

Preporuke za štampanje

  • Temperatura štampe: 200–230°C.
  • Temperatura grejnog stola: oko 60°C.
  • Preporučene podloge: staklo, PEI folija, Kapton ili plava traka uz 3Dlac sprej.

Meet Azurefilm Refill LumberLay – a unique material that looks and feels like real wood. This filament combines a natural look with sustainable 3D printing practices.

LumberLay filaments contain 40% recycled wood and 60% PLA, allowing your printed models to have the look and texture of natural wood, with wood-like physical properties.

They are designed for use with the Master Spool System to reduce waste and support sustainability. They are also compatible with the Bambu Lab Reusable Spool .

Important notes

  • The filament must be dried before use (8 hours at 55°C).
  • Not compatible with 0.2 mm nozzle.

Printing recommendations

  • Printing temperature: 200–230°C.
  • Temperature of the heating table: about 60°C.
  • Recommended substrates: glass, PEI foil, Kapton or blue tape with 3Dlac spray.
Back to top